37kw 50HP Two-Stage Direct Drive Fixed-Speed Oil Lubricated Compressor Screw Air Pump

• Customization: Available
• After-sales Service: 24/7 Online Service
• Warranty: 18 Months
• Model NO.: MQF37KW
• Cooling System: Air Cooling
• Power Source: AC Power
• Cylinder Position: Vertical
• Structure Type: Closed Type
• Installation Type: Stationary Type
• Type: Twin-Screw Compressor
• Working Principle: Screw Compressor
• Capacity: 300sets/Month
• Power: 37kw-355kw
• Pressure: 6/7/8 /10 Bar
• Custom: Produce According Your Company Actual Requirements
• Pipe Diamater: DN50-DN125
• Transport Package: Standard Export Packing
• Specification: 2380*1300*1590
• Trademark: MUQI
• Origin: China
• HS Code: 8414200000

Product Description

Product Parameters

 

Model	Power(Kw)	Free Air Delivery(m³/min)				Weight(kg)	Drive Way	Dimension(mm) L*W*H			Pipe Diamater
		0.6Mpa	0.7MPa	0.8MPa	1.0MPa
MQF37A	37	7.1	6.9	5.8	5.4	950	Direct Drive	1600*1000*1550			G1 1/2
MQF45A	45	10	9.5	7.8	6.8	1500	Direct Drive	2150*1300*1700			G1 1/2
MQF55A	55	13	12.5	9.2	7.5	1700	Direct Drive	2150*1300*1700			G1 1/2
MQF75A	75	15.5	15.2	12	10.2	1800	Direct Drive	2200*1300*1800			DN65
MQF90A	90	19.8	19.5	15	14	2700	Direct Drive	2700*1800*1850			DN65
MQF110A	110	23	22.5	18.3	14.3	2800	Direct Drive	2700*1800*1850			DN65
MQF132A	132	27	26.5	23.5	18	3100	Direct Drive	3200*1880*1890			DN80
MQF160A	160	33.5	32.5	27.5	22.5	4100	Direct Drive	3200*1880*1890			DN80
MQF185A	185	38	37.5	33	25	4400	Direct Drive	3800*2150*2230			DN80
MQF200A	200	42.5	41	33.5	33	4800	Direct Drive	3800*2150*2230			DN100
MQF220A	220	46	45	41	37	5500	Direct Drive	4000*2280*2250			DN125
MQF250A	250	53.5	51	45	38	6200	Direct Drive	4000*2280*2250			DN125
MQF280A	280	60	56	50	44.1	6800	Direct Drive	4200*2280*2260			DN125
MQF315A	315	70.4	60	53	49.5	7200	Direct Drive	4200*2280*2260			DN125
MQF355A	355	76.7	72.5	60	52.7	8500	Direct Drive	4200*2280*2260			DN125

 Operation Instructions:
A:Before Operation:

1. Confirm the voltage of the power supply and the power indicator light is lit.
2. Please open the leak valve of the oil & gas tank, drain the condensed water and immediately close the leak valve when oil leaks out.
3. Please check the oil level and keep it between indicator oil level.
4. Water cooled system , confirm that cooling water supply is normal.
5. When generator driving the belt, please check the belt tension correctly, not too loose or too tight.

B:Start up

1. Main power switch in.
2.  Press the start button to turn on the motor, working indicator light is on.
3. Check the discharge pressure gauge and lubricating oil pressure gauge are in correct indication.

C:Operation
  Please keep the exhaust temperature between 75ºC-95ºC to avoid condensation and precipitation and emulsify the oil.
D:Stop

1. Press the "off" button, about 10-15 seconds later, the delay electromagnetic valve acts, and the compressor stops running.
2. Turn off the power.
3. Don't use the emergency stop button in case of non emergency.

E: Precautions:

1. For initial start-up and after motor maintenance, determine the running direction of the press (as indicated by the arrow).
2. Do not mix different brand of river lubricating oil.
3. Change the consumables, lubricating oil and detail operation method, please refer the instruction manual.