Sillent 7.5kw 11kw 15kw 22kw Rotary Screw Air Compressor 4-in-1portable Air Compressor for Laser Cutting Machine

• Customization: Available
• After-sales Service: 24 Hours Online
• Warranty: 12 Months
• Cooling System: Air Cooling
• Power Source: AC Power
• Cylinder Position: Vertical
• Structure Type: Closed Type
• Installation Type: Stationary Type
• Type: Single Screw Compressor
• Driven Method: Driect Driven
• Bearing: Skfbrand
• Air Tank: 300L
• Motor: IP54
• Status: All New
• Transport Package: Wooden Box
• Specification: 1110*860*1310
• Trademark: MUQ
• Origin: China
• HS Code: 8414200000
• Production Capacity: 3000per Month

Product Description

Product Parameters

Laser Cutting Screw Air Compressor Technical Parameters

Model	KW	Pressure(bar)	FAD(L/Min)	Air Outlet Pipe Diameter	Dimension (mm)	Weight (kg)	Air Tank Volume(L)
MQ-7.5V	7.5	8-13	0.8-1.1	Rp1/2	1700*800*1500	420	350
MQ-11V	11	8-13	0.84-1.6	Rp1	1700*800*1700	490	400
MQ-15V	15	8-13	1.4-2.4	Rp1	1700*800*1700	510	400
MQ-22V	22	8-13	2.2-3.6	Rp1-1/4	1700*800*1800	610	500
MQ-30V	30	8-13	2.93-5.0	Rp1-1/4	1700*800*1800	650	500

FAQ

Operation Instructions:
A:Before Operation:

1. Confirm the voltage of the power supply and the power indicator light is lit.
2. Please open the leak valve of the oil & gas tank, drain the condensed water and immediately close the leak valve when oil leaks out.
3. Please check the oil level and keep it between indicator oil level.
4. Water cooled system , confirm that cooling water supply is normal.
5. When generator driving the belt, please check the belt tension correctly, not too loose or too tight.

B:Start up

1. Main power switch in.
2.  Press the start button to turn on the motor, working indicator light is on.
3. Check the discharge pressure gauge and lubricating oil pressure gauge are in correct indication.

C:Operation
  Please keep the exhaust temperature between 75ºC-95ºC to avoid condensation and precipitation and emulsify the oil.
D:Stop

1. Press the "off" button, about 10-15 seconds later, the delay electromagnetic valve acts, and the compressor stops running.
2. Turn off the power.
3. Don't use the emergency stop button in case of non emergency.

E: Precautions:

1. For initial start-up and after motor maintenance, determine the running direction of the press (as indicated by the arrow).
2. Do not mix different brand of river lubricating oil.
3. Change the consumables, lubricating oil and detail operation method, please refer the instruction manual.